91AV成人导航,伊人狼人影院,操逼精品一,中国一级AV片,黄色毛片一区

There are many precautions for starting a CNC lathe. If one of the items cannot be checked, the machine will be shut down again if there is a slight problem, and if there is a serious problem, it will cause certain losses, such as calibration work. If the specifications of this processing and the previous processing are different, if not calibrated, it will cause data deviation. Today, we have our CNC lathe manufacturer to share with you the top ten preparations for starting a milling machine.

1) Clean the interior of the electrical control box and keep it clean.

2) Calibrate the horizontal state of the workbench and bed reference, adjust the sizing block if necessary, and tighten the nuts.

3) Clean the air filter of the hydraulic milling and drilling machine, and replace it if necessary.

4) Check the hydraulic device pipelines and connectors to ensure that there is no movement or wear.

5) Clean the scraper plate on the sliding surface of the guide rail of the hydraulic milling and drilling machine.

6) Check all solenoid valves, travel switches, and proximity switches to ensure they are functioning properly.

7) Check the oil filter screen in the hydraulic box and clean it if necessary.

8) Check if the wiring terminals of each cable are in good contact.

9) Ensure that the interlocking devices, time relays, etc. of the hydraulic milling and drilling machines can work properly.

10) Ensure that the CNC device can work properly.

The above is the top ten preparation items for CNC lathe manufacturers to share when starting milling machines. We hope that the above description can be helpful for everyone in operating milling machines in the future. In the next issue, we will explain the specific operation of shutting down the machine.